Trouble
Reason
Error
code/hint
Solution
Without suitable
pot
Without suitable pot
Buzz every 3 S, the LED window
flashing “
- -”
Place a suitable pot
IGBT overheat
IGBT temperature over
90
℃
Induction stop working.
IGBT temperature low to
less than 70
℃
.
Overhigh
voltage
voltage>=275V±10V
LED window display “E
2” Buzz 5
times,
induction stop working.
Recovery the voltage to
normal.
Over
-
low
voltage
voltage<100V±10V
LED window display “E
1” Buzz 5
times,
induction stop working.
Recovery the voltage to
normal.
IGBT thermistor
open/short
circuit
∞ Or
0
LED window display “E
3” Buzz 5
times,
induction stop working.
Power off and repair
abnormal circuits
Glass panel
thermistor
open/short
circuit
∞ Or
0
LED window display “E5” Buzz 5 times,
induction stop working.
。
Power off and repai
r
abnormal circuits
Glass panel
over heat / dry
heat
The temperature for glass
panel is over than set
value.
LED window display “E
6” Buzz 5
times,
induction stop working.
Power off the hob
Glass panel
thermistor
failure
The variate of value of
resistance
less than 3 AD
after 6mins. It doesn’t start
working.
LED window display “E4
” Buzz 5
times,
induction stop working.
Power off the hob
SPECIAL SYMBOL
This symbol indicates that the appliance cannot be thrown away with other
household waste. If the appliance ends up in dumping fields, toxic substances
may enter the groundwater and food, causing harm to your health.
The appliance need to be classified before thrown away. Contact the local or
competent authorities for proper disposal of the appliance.
SELECT SUITABLE COOKWARE
CLEANING AND MAINTENANCE
1. Turn off and unplug the appliance before cleaning. Do not clean if the surface is still hot.
2. Clean the ceramic surface, control panel and outer part:
- Wipe out small stains with a soft towel.
- For fat stains or dirt, use a wet towel and a couple drops of neutral detergents.
3. While the cooling fan is operating, dirt may cover the air vent, make sure to clean it with a brush or
wet towel on a regular basis.
4. Do not clean the appliance directly under running water to avoid short circuit or damage.
5. For a more durable cooktop, the cooling fan is still working after the appliance is turned off. It is a
good idea to wait for the fan to stop before you unplug the appliance.
6. Dry all components thoroughly before second use.
Applied cookware include:
Cookware made from steel, regular or enameled cast
iron, inox with the diameter from 12 to 26cm.
Unapplied Cookware:
Cookware made from heat resistant glass, ceramic/ bronze,
aluminum with diameter under 12cm.
Enameled
iron pan
Round bottom
pot
Bronze or
aluminum pot
Pot bottom
diameter – 12cm
Pot with stands
Ceramic pot
Heat resistant glass pot
Iron or enameled
iron pot
Cast iron pan
Iron pot
Saucepan
Inox pot
Iron pan
16
17