Sunhouse MAMA SHD6875, Instruction Manual, Page: 7 / 9

OPERATION INSTRUCTION
FUNCTION INSTRUCTION
INSTALLING THE DEVICE :
• This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments
• Place the device on a stable and level surface.
• Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
• Do not block the ventilation slots of the device. This may overheat the device. Keep a
min. distance of 5 to 10 cm to walls or other items.
• Do not place the induction hotplate next to devices or objects, which react sensitively to magnetic
fields (e.g. radios, TVs, cassette recorders, etc.).
• Do not place induction hotplates next to open fires, heaters or other sources of heat.
• Make sure that the mains connection cable is not damaged or squashed beneath the device.
• Make sure that the mains connection cable does not come into contact with sharp edges and/or hot
surfaces
COMMISSIONING THE DEVICE :
POWER LEVEL
FUNCTION:
CONTROL PANEL:
• Prior to connecting the device, check whether the voltage indicated on the type plate corresponds to
the voltage supply in your home. A wrong connection may lead to grave damage on the device and
injury to persons.
• The hotplate's surface consists of temperature-resistant ceramics. In case of damage, even if this
concern only a small tear, disconnect the device from the power supply immediately and contact the
customer service.
• We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other metal
objects on the hotplate. These may heat up when the device is turned on.
• Do not place any magnetically objects like credit cards, cassettes etc. on the glass surface while the
device is in operation.
• On order to avoid overheating, do not place any aluminium foil or metal plates on the device.
• Do not insert any objects like wires or tools into the ventilation slots. Attention: this may cause electric
shocks.
• Do not touch the hot surface of the ceramic field. Please note: the induction hotplate does not heat up
itself during cooking, but the temperature of the cookware heats up the hotplate!
• Do not heat up any unopened tins on the induction hotplate. A heated tin could explode; therefore
remove the lid under all circumstances beforehand.
• Scientific tests have proven that induction hotplates do not pose a risk. However, persons with a
pacemaker should keep a minimum distance of 60 cm to the device while it is in operation.
1.1 It has 1 “ON/OFF” rotary knob, “Preset / Timer”
、
“+”
、
and “-” 3 touch buttons.
1.2 “ON/OFF” rotary knob ： It’s for power on, power off, select function and adjust the power.
1
）
In power off mode, press the “ON/OFF” knob, the unit will enter into standby mode. Press and hold
the “ON/OFF” knob for 2 seconds, the unit will back to power off mode. In standby mode, if no any
operation within 30 seconds, the unit will power off automatically.
2
）
In standby mode, press the “ON/OFF” knob to select function, and then press the knob again to start
working. The unit will detect the pot if available or not. If there is no suitable pot, it will buzz every 3
seconds. After 4 buzz (about 12 seconds), if still has no suitable pot, the unit will power off automatically.
If put a suitable pot on the unit within 12 seconds, it will start working accordingly.
3
） In working mode, press the “ON/OFF” knob to pause the working, press the knob again to resume
working.
4
） In working mode, turn the knob to adjust the power level.
1.3 “+”
、
“-”
：
Adjust the time range when set a timer or preset the unit.
1.4 “Preset/Timer”: Preset a time and set a timer for working.
2.1 Hotpot
2.1.1 In standby mode, select the hotpot function for working. The indicator light will lit and LED display
“AU”. The default power is 2100W. When the temperature is reach 100
℃ , the unit will decrease power to
1000W. If add 100g food into the pot within 2 seconds, the unit will increase power to 2100W automati-
Remark: Interval 1 is working with 1000W,8S off/2S on.
Interval 2 is working with 1000W,6S off/4S on.
Interval 3 is working with 1000W,4S off/6S on.
Level
1 2 3 4 5 6 7 8 9 10
Power
（
W
）
120 400 800 1000 1200 1300 1500 1600 1900 2100
Interval 1 Interval 2 Interval 3
Indicator
light
1 light 2 lights 3 lights 4 lights
5
lights
6 lights 7 lights 8 lights 9 lights 10 lights
Default
working time
Default
power/program
Default level Default timer Timer range Preset Preset range
Hotpot 2:00 2100W Level 10 0:00 00:00-24:00 Yes 00:00-24:00
Stir fry 2:00 2100W Level 10 0:00 00:00-24:00 Yes 00:00-24:00
Soup/
Porridge
2:00 2100W-1000W Level 10 0:30 00:30-03:00 Yes 00:00-24:00
Steam 0:30 2100W-1000W-
keep warm
Level 10 0:05 0:05-01:00 Yes 00:00-24:00
Water 0:30 2100W-keep
warm
Level 10 ---- ---- Yes 00:00-24:00
Sauté 2:00
2100W
Level 10 0:05 00:05-01:00 Yes 00:00-24:00
12 13