![Sunheat S1220U Installation And Operation Manual Download Page 5](http://html1.mh-extra.com/html/sunheat/s1220u/s1220u_installation-and-operation-manual_1396817005.webp)
www.sunheater.com
5
5
1) Ensure there is adequate work space to unroll the 20’ collectors.
2) Remove the collectors from the box and the strap from around the
collectors. Slowly uncoil the panels.
Note:
Laying the collectors in the reverse direction of the coils will help
flatten the panels.
3) Remove and discard the black protective caps covering the threaded
portion of the headers.
4) Join the headers with the white labels
together using a rubber hose connector
and two 1 1/2" hose clamps. Position the
hose clamps 1/2” in from each end of
rubber connector hose and tightens.
5) Locate the header that does not have
the white serial number label and
install the PVC end caps on either
end of that header.
6) Locate the header with the white
serial number label and install the
PVC elbow connectors on either end
of that header.
7) Turn the pool pump off and
ensure the handle of the filter
is in the OFF/CLOSED position.
8) Plug the return fitting to
prevent water loss.
9) Remove the flex hose
from the return fitting of
the pool and secure it to
the lower PVC elbow
connector using a stainless
steel clamp.
10) Secure another flex hose (not included) to the top PVC elbow and
return fitting of the pool using the stainless steel hose clamps
following the above system layout.
The collector is now installed and ready to use. Ensure that all
fittings are secure.
11) Remove the plug from return fitting and turn the handle of the
filter to the FILTER position.
12) Turn the pool pump to the ON position.
Note:
Air bubbles may come through the return line during initial
start-up of the collector. This is normal and will stop after all the air has
been purged from the solar heating system.
S2
22
0U OR MULTI-SYSTEM INSTALLATION
This layout is for system of 2 or more collectors installed near the pool filter equipment. Installing the collector on a roof, rack or fence may
require additional plumbing and hardware kits.
Cool Water
(Feed)
Warm Water
(Return Fitting)
Pool Pump
Elbow Connector
Elbow Connector
Black Rubber Connector Hose
Labels
Filter
White E
nd Caps
Feed Hose
Return Hose