Connect your SHFiM2-Lite router to a power Source. Connect the power
on your SHFiM2-Lite router. Note: If you want to connect your SHFiM2-Lite
1.3 SHFiM2-Lite Node Front/Top /Bottom View
1.2 SHFiM2-Lite Router Bottom View
Page - 04
2.Connect Your Router
Incoming connection from Internet Service
Provider (ISP) designated port or from modem
Wan Ethernet Port
LAN connection for your computer/device
Press and hold for 7 seconds and LED light will
blink in blue. Then it will turn off and restart the
router to factory setting. Wait for 30 seconds for
the restart process to finish or to be completed
Lan Ethernet Port
DC 12V 1.5A
DC Power Jack
Reset Button
You can use the status lights on the front of the
mesh nodeto verify various conditions.
Mesh disconnection
Red solid
Main mesh and node connection is fair
Fast Blink Red
The main mesh and node connection is good
The node is resetting to factory default settings
Blue solid
Description
Status Light
Fast Blink Blue
Status Light
Note: Different Area match different Specification Plug PIN.
2.1Connect your Router
1. Use the included Ethernet cable to connectyour modem to the Wan Ethernet
router to an existing gateway, we recommend that you turn off your existing
gateway’s Wi-Fi.
2.
adapter to your router and plug the power adapter into an outlet.
Page - 05
