20
N
No
o..
D
De
evviic
ce
e
Q
Qu
ua
an
nttiittyy
N
No
otte
e
I
Disc springs
12
M8
J
Cross recessed
hexagon bolt
10
M5×16
60
M6×20
12
M4×16
Note: The foregoing components and their quantities are based on the standard inverter,
and those of the actual product may differ.
4.2
Identifying the Inverter
Identify the inverter via its nameplate(shown as A in the following figure). The nameplate
contains the following information: inverter model, major technical parameters, marks of
conformitys, origins, and serial number.
Very important technical parameters and inverter-related parameters are
displayed on the nameplate.
Protect the nameplate at all times!
4.3
Checking for Transport Damages
The inverter has been strictly inspected and tested before delivery. Despite robust
packaging, the container or internal devices may be damaged during transport.
Therefore, once receiving the inverter, perform a detailed inspection.
If any damage is found, contact the forwarding company or Sungrow immediately.
•
Check the scope of delivery described in
for completeness.
•
Check that the inverter and inner devices match the models included in the original
order.
•
Check thoroughly the inverter and inner devices for any possible damages caused
during transport.
System Manual
Summary of Contents for SG3125HV-20
Page 2: ......