66
P
Pa
arra
am
me
ette
err
D
De
essc
crriip
pttiio
on
n
Adjustment ratio (%)**
If the adjustment does not reach the set target
value, increase or decrease adjustment value
according to the set adjustment ratio, so as to
reach the target value.
Control Cycle**
Time interval of delivering dispatching instructions
Parameter range: 5~60s
The parameters noted with * refer to the parameters that need to be set only when the
Control Method is set to “Open-loop Control”.
The parameters noted with ** refer to the parameters that need to be set only when the
Control Method is set to “Closed-loop Control”.
step 4
After finishing parameter setting, click "Save" to save the operation.
-- -- E
En
nd
d
10.2.1.3 Local Power Control
If active dispatching instruction or dispatching target value is used as dispatching input
locally, the active control mode is set to "Local power control".
step 1
Click "Power control" -> "Active power" to enter the active power interface.
step 2
Set the active control mode to "Local power control".
step 3
Set local dispatching parameters. For specific parameter description, refer to the
following
User Manual
