To Light Pilot:
Rotate control knob to “Pilot' position.
Firmly depress knob for 30 seconds while
lighting pilot through ½ diameter lighting
hole above control. Pilot should remain lit.
To Turn Heater ON:
Rotate control knob to “ON” position.
To Turn Heater and Pilot OFF:
Rotate control knob to Pilot” position,
depress slightly and turn to “OFF” position.
Wait 5 minutes alter complete shutdown of
heater before relighting pilot.
Sunglo Infrared Heaters
™
BASIC LIGHTING INSTRUCTIONS
To Light Pilot:
Rotate control knob to “Pilot' position.
Firmly depress knob for 30 seconds while
pressing the red button on the side of the
heater. Pilot should remain lit.
To Turn Heater ON:
Rotate control knob to “ON” position.
To Turn Heater and Pilot OFF:
Rotate control knob to Pilot” position,
depress slightly and turn to “OFF” position.
Wait 5 minutes alter complete shutdown of
heater before relighting pilot.
To Light Pilot:
Rotate control knob to “Pilot' position.
Firmly depress knob for 30 seconds while
lighting pilot through ½ diameter lighting
hole above control. Pilot should remain lit.
To Turn Heater ON:
Rotate control knob to “ON” position and
turn on 24 VAC electrical power to heater.
To Turn Heater and Pilot OFF:
Rotate control knob to Pilot” position,
depress slightly and turn to “OFF” position.
Wait 5 minutes alter complete shutdown of
heater before relighting pilot.
To Turn Heater ON:
1.Turn the gas valve “ON”.
2.Turn “ON” Electrical Switch (24 VAC
only)
To Turn Heater OFF:
1.Turn the electrical power “OFF”.
2.Turn the gas valve “OFF”.
Warning:
If burner fails to ignite, shut OFF
electrical power and wait (5) minutes
before repeating lighting process.
Warning:
DO NOT attempt to light this
heater manually.
MANUAL CONTROL
This heater utilizes a standing pilot
with thermocouple safety shutoff.
This heater can be either lit with a
match or a long stem lighter.
The manual control allows you to
regulate the heat.
MANUAL CONTROL WITH
DSI
This heater utilizes a standing pilot
with thermocouple safety shutoff.
This heater is equipped with a
battery operated spark ignition to
light the pilot
This heater can be either lit with a
match or a long stem lighter.
The manual control allows you to
regulate the heat.
MANUAL CONTROL WITH
24 VAC ACTUATOR
This heater utilizes a standing pilot
with thermocouple safety shutoff.
This heater can be either lit with a
match or a long stem lighter.
The 24 VAC Actuator allows you
to turn ON/OFF the main burner
with a switch.
ELECTRONIC CONTROL
(DO NOT MATCH LIGHT)
This heater utilizes a electronic
ignition and flame monitoring thru
flame rectification.
This heater requires 24 VAC in
order to operate.
Model
Lighting Instructions Control Description
PSA265, A242, A244
PSA265, A242, A244
WITH DSI
PSA265V & A244V
PSA265E & A244E
NOTE: 24VAC electrical power
is required to turn ON main
burner after pilot is lit.
NOTE: 24VAC electrical power
is required to turn ON heater.
6
