35
2)
Connect the SunFounder Uno board to your computer via a USB cable. Open the file
Car_1_Forward.ino
under the path
Smart Car V2.0 for Arduino\Code\Car_1_Forward
.
Before uploading the sketch to the board, you need to select the right
Board
and
Port
through
Tools
->
Board
->
Arduino/Genuino Uno
.
3)
Then click to
Tools
->
Port
->
COM5
(your port may be different)
4)
Click the
Upload
icon. The code is uploaded successfully when you are prompted
"
Done Upload
" at the bottom.
5)
After uploading the code successfully, you can hear a sound of the gear moving when
the servo rotates. It means the adjustment succeeds. DO NOT plug out the servo wire
yet. Keep it power on, and let’s move on to the next step.
SunFounder
