SunFounder Sensor Kit V1.0 Manual Download Page 1

Page: 1 / 90

Preface

About SunFounder

SunFounder is a technology company focused on Raspberry Pi and Arduino open source

community development. Committed to the promotion of open source culture, we strive to

bring the fun of electronics making to people all around the world and enable everyone to

be a maker. Our products include learning kits, development boards, robots, sensor modules

and development tools. In addition to high quality products, SunFounder also offers video

tutorials to help you build your own project. If you have interest in open source or making

something cool, welcome to join us! Visit www.sunfounder.com for more!

About Sensor Kit V1.0

This kit is suitable for SunFounder Uno, SunFounder Mega 2560, SunFounder Duemilanove and

SunFounder Nano. All the code in this user manual is compatible with these boards.

Our SunFounder board is fully compatible with Arduino board.

You can go to our official website

www.sunfounder.com

to download related code by

clicking

LEARN

Get Tutorials

. If you have any questions, please send an email to

[email protected]

. Also welcome to leave a message and share your projects on our

FORUM

Note: This kit is different from other kits. All the components in this kit are provided in the form

of modules which integrate some necessary components, such as comparator, resistor, and

capacitor and so on. Therefore it is convenient for circuit connection.

Reprint 2.0

SunFounder

Summary of Contents for Sensor Kit V1.0



























































































Search results

Summary of Contents for Sensor Kit V1.0

Reviews:

Related manuals for Sensor Kit V1.0

Brands by name

Popular brands

SunFounder Sensor Kit V1.0, Manual

Search results

Summary of Contents for Sensor Kit V1.0

Reviews:

Related manuals for Sensor Kit V1.0

Brands by name

Popular brands