SunFounder RasPad 3 Manual Download Page 179

Page: 179 / 239

SunFounder RasPad 3

Now, click on the green flag above the stage area to start the game and explore the magical binary!

Challenge

I believe that you will be smart enough to program and implement this game soon. Next, we will add some challenges
to enrich our game content.

• Add a Zero sprite to convert random integers between 1-32.

• When you click on the Zero sprite, a â ˘

AIJPopâ ˘

A˙I sound effect will be emitted.

• 1 point will be deducted for incorrect answers!

7.7.8 Flappy Parrot

Description

Today we made the parrot Devin avoid the trees for food.

Click on the green flag to start.

Or click Flappy Parrot, and then learn online tutorial on the Scratch official website.

Required Components

• A RasPad 3

• Scratch 3 (eitherÂ˘aonlineÂ˘aorÂ˘aoffline)

7.7. Scratch Projects

175

Summary of Contents for RasPad 3
















































































































































































































































Search results

Summary of Contents for RasPad 3

Reviews:

Related manuals for RasPad 3

Brands by name

Popular brands

SunFounder RasPad 3, Manual

Search results

Summary of Contents for RasPad 3

Reviews:

Related manuals for RasPad 3

Brands by name

Popular brands