43
Step 5
: Move the
Aileron
channel stick.
If the
Roll
channel value changes, no need to modify its channel. If the
Yaw
changes
when you move the
Roll
stick, just exchange the channel
Chan4
and
Chan5
.
Step 6
: Move the
Rudder
channel stick.
Then you may see
Yaw
channel value changes, no need to modify then.
Step 7
: Since we only connect from CH2 to CH6 in receiver wiring part, you can set
FlightMode
to Chan5, and move the aux channel to see whether the slider is toggled or not.
If yes, the corresponding one is
Chan5
. Remember the aux channel for the aircraft flight
mode setting.
Save the setting.
Step 8
: Check four motors’ threshold values.
Click
Output
on the menu column at the left side.
Neutral
is the critical point of the
motor
to spin
that you configured previously. So, we can know the highest critical point of the
four motors is
1089.
SunFounder