10
3.
CC3D Software Debugging
Pay attention
NOT
to install the propellers at this time for the sake of your safety.
Installing
the Ground Control Station (GCS)
Go to
WIKI
on our website
->
Drones/Model Aircrafts
->
CC3D
->
SunFounder 250
or
Q250
or
SunFounder 250+Radiolink T8FB Remote Controller(Assembled),
Find
Related links
at the bottom of the page.
Here we take
OpenPilot
as an example, but you can also use
LibrePilot
instead. Check the
installation steps below:
Open the GCS installer file downloaded and take these steps:
1.
Choose a language from the
drop-down list
on the first page, then click
OK
. (You can
cancel installation at any point by clicking
Cancel
.)
2.
The
OpenPilot Welcome
screen appears. Click
Next
.
3.
Review the conditions of the license agreement and then click
I Agree
to accept the
terms.
4.
You can select which components to install in the
Choose Components
dialog box. Click
Next
to accept the default selections.
5.
Click
finish
to complete the installation
SunFounder