Maintenance:
Foam air filter on the back of the control unit must be cleaned weekly periodically with
warm soap and water. Replacement of the foam filter is recommended every 6 months.
Storage:
Deflate mattress using the CPR valve until all air is
exhausted completely. With the cover on, roll the mattress starting
at the foot section. Secure with straps and keep mattress in a clean
dry area away from heat or flames.
The filter is easily removed and
reinserted through the gap in the
back housing.
TROUBLE SHOOTING GUIDE
If mattress is not inflating:
-
Make certain none of the hoses are punctured, kinked or disconnected.
-
Check for proper connections from the hoses to the pump. Make sure they are secure.
-
Check or clean intake filters.
-
Be sure CPR valve is closed.
If there is power loss:
-
Check the ON/OFF switch.
-
Check to be sure that unit is plugged in.
-
Check the fuse located just under the power cord plug on the blower unit.
9
