9
User's Manual
User's Manual
Please consider the following
when setting up your new system:
•
before making or changing any
connections, always make sure that the
subwoofer and your other components
are turned off. Also turn down the
volume control of the subwoofer and
your preamplifier or receiver.
•
This diagram shows all of the low-power
components sharing a power strip which
is connected to the same outlet by the
amplifier.
•
The subwoofer is connected to an outlet
on the same circuit breaker, provided
that the total system current draw does
not exceed the breaker current rating.
•
This arrangement will reduce the
possibility of an audible hum in your
system caused by a ground loop.
•
Whenever possible, keep the power
cords away from the signal cables
or speaker wires to prevent any hum
or interference being heard in
the speakers.
•
Choose reliable high-quality
interconnect cables, also called patch
cords or RCA cables. They should be
fully shielded and as short as possible
for the job. The longest cable in your
system will likely be to the subwoofer,
so choose a good quality brand.
•
Some patch cords can be a very tight
fit and there is usually a preferred
method of getting them on and off.
Some have to be removed with a
twisting action. be gentle or you may
damage the jacks of the subwoofer
or your other components.
Media Server
Blu-Ray
Connections
9901375_Rev-A_Sunfire_XTEQ_User_Manual_0812_PRINT_ENG.indd 9
8/12/14 7:10 PM
