User's Manual
39
CHAPTER 4
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
SETTINGS
MAIN ZONE
ZONE 2
SPEAKERS
VIDEO
SOFTWARE
CONTROL
Speaker Position
This menu allows you to enter the
distance from your listening position
to the various speakers. The TGIV will
then automatically adjust and correct
the speaker delay times. The sound
from each speaker should arrive at
the listener at the correct time. The
distance measurement is not criti-
cal, and a visual estimate is usually
adequate.
The procedure is as follows:
1. Measure or visually estimate
(in feet and inches) how far
each speaker is away from the
center listening position of your
home theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance
in feet and inches for each
speaker.
3. The TGIV automatically sets
the appropriate delays for each
speaker so the sounds arrive
at the listening position at the
correct time.
4. Use this table to record your
speaker distance measure-
ments.
SPEAKER
DISTANCE
LEFT MAIN/SIDE
RIGHT MAIN/SIDE
CENTER
LEFT SURROUND
RIGHT SURROUND
LEFT SURR BACK
RIGHT SURR BACK
SPEAKERS
SIZE
POSITION
CALIBRATION
L-R CROSSOVER
110 HZ
C-SURR CROSSOVER 90 H
SUBWFR MODE
Speaker Position Menu
SPEAKER POSITION
L MAIN/SIDE
4 ft 6in
R MAIN/SIDE
4 ft 6in
CENTER
3 ft 0in
L SURR
4 ft 0in
R SURR
4 ft 0in
L SURR BACK
5 ft 0in
R SURR BACK
5 ft 0in