Sunfire SX-6-26A, Installation And Operation Manual

Page: 9 / 12

Part # 4515558 (02/29/08) Page 9
OPERATION
Open Top Burners
Lighting:
1 . Open 1/4 turn pilot isolation valves .
2 . Light pilots .
. Turn valve completely on . Burner flame should be 1/2
inch (1mm), stable blue flame, and should impinge on
the bottom of a pot placed on the ring grate .
Shut-Down:
1 . Turn all valves to the “OFF” position .
2 . If the unit is to be shut down for an extended period of
time, close the pilot isolation valves .
CAUTION: Should burner ignition fail within 5 seconds,
turn the burner valve off and repeat steps 1 through 5 . If
ignition continues to fail, consult your factory authorized
service agency .
Standard Ovens
Lighting:
1 . Remove oven bottom(s) .
2 . Depress and hold the red reset button, located on the
safety valve behind the kick panel below the oven door,
while lighting the oven pilot . Continue to hold the reset
button for at least 60 seconds after the pilot is lit . Release
the button . If the pilot does not stay lit, wait five minutes,
then repeat the procedure .
Shut-Down:
1 . Turn all valves and thermostats to the “OFF” position, or
lowest setting .
2 . If the range is to be shut down for an extended period of
time, close the in-line gas valve .
Re-lighting:
1 . Turn all gas valves off .
2 . Wait five minutes .
. Follow procedure under “ Lighting ” at left .