Sunfire OLE-2SF, User Manual

Page: 4 / 24

Introduction
The Olé
®
-SF Film Interactive
Touchpad (FIT) is a revolutionary
in-wall controller for your Sunfire
receiver or processor. Using a
photographic film overlay instead of
hard buttons, it marries the beauty
of a touchscreen with the simplicity
of a keypad –seamlessly controlling
all major functions of your home
theater or secondary room.
The backlit film transparency
provides system control icons and
functions, while a 4-line " color
OLED displays multiple pages of
source control and feedback to the
user. Multiple IR commands, or
‘Sequences’, can be issued from a
single press of any button. Program-
ming is accomplished with Sunfire’s
SunTools™ setup software, and is
done through a direct link from a
computer to the mini-USB download
port on the front of the Olé-SF.
Each button location (or “hot
spot”) is assigned a command
that controls sources such as
A/V equipment, HVAC systems,
drapes, shades, lighting systems,
or even fireplaces! Your Olé-2SF is
configured out of the box to control
your Olé-ready Sunfire receiver or
processor’s Zone output. Custom-
programming by your authorized
Sunfire dealer will allow reconfigur -
ing of the Olé-SF to control the
main theater system and a variety of
functions required for your specific
system.
Unpacking
Your Olé-SF touchpad should
reach you in perfect condition. If
you do notice any shipping damage,
please contact Sunfire immediately.
Gently lift out the touchpad and all
the packing material. It is important
to save all the packing materials and
the box in case your touchpad ever
needs to be moved or shipped for
repair.
Make sure that you keep your
sales receipt. It is the only way
to establish the duration of your
Limited Warranty and it may come in
useful for insurance purposes.
4