6613A — OPERATING MANUAL AND PARTS LIST
2
rev. 07/15/04
6613A
2 Ton Capacity Low Profile Jack with Quick Lift System
LUBRICATION
All moving joints require lubrication often. Remove handle and
grease the lower end of handle where it rotates in the handle
socket. Using a grease gun, grease the lift arm pivot shaft grease
fitting until grease appears at the end of the shaft. Oil all lift
arm linkages, front wheels and rear casters.
OPERATING INSTRUCTIONS
IMPORTANT:
Before attempting to raise a vehicle, check vehicle
service manual for recommended lifting surfaces.
1.
To raise load:
Close release valve tightly (by turning handle
clockwise).
DO NOT OVERTIGHTEN.
Position jack under
load so that saddle will contact load firmly and load is
centered so it cannot slip. Operate jack handle until saddle
approaches the load. Once again check to see that saddle
is correctly positioned. Raise load to desired height. Place
jack stands of appropriate capacity under the vehicle.
DO
NOT CRAWL UNDER VEHICLE WHILE LIFTING VEHICLE OR
PLACING OR REMOVING JACK STANDS!
Place jack stands
at vehicle manufacturer’s recommended lift areas that
provide stable support for the raised vehicle.
2.
To lower load:
Open release valve
VERY SLOWLY
(by
turning handle counterclockwise). When release valve is
opened, saddle and load will be lowered. Lower the vehicle
slowly so as not to shock load the jack stands. Once repairs
are completed, raise vehicle enough to remove jack stands.
Lower vehicle very slowly.
CAUTION:
Keep hands or feet away from the hinge mechanism
of the jack.
SPECIFICATIONS
Capacity
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ton
Low Lift Height
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9"
Raised Height
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.5"
Length
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28"
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Lbs.
Chassis Width
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15"
Diameter Saddle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.75"
LIMITED WARRANTY:
SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S SUNEX TOOLS
®
BRANDED
PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools
®
branded products which fail to give satisfactory service due
to defective workmanship or materials, based upon the terms and conditions of the following described warranty plans
attributed to that specific product.
This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our option any
part or unit which proves to be defective in material or workmanship.
Other important warranty information...
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not
cover any repairs or replacement made by anyone other than Sunex Tools or its authorized warranty service centers.
The foregoing obligation is Sunex Tools’ sole liability under this or any implied warranty and under no circumstances shall we
be liable for any incidental or consequential damages.
Note:
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Return equipment or parts to Sunex Tools, transportation prepaid. Be certain to include your name and address, evidence of
the purchase date, and description of the suspected defect.
If you have any questions about warranty service, please write to Sunex Tools. This warranty gives you specific legal rights and
you may also have other rights which vary from state to state.
Repair kits and replacement parts are available for many of Sunex Tools products regardless of whether or not the product is
still covered by a warranty plan.
SHIPPING ADDRESS:
Sunex Tools
315 Hawkins Rd.
Travelers Rest, South Carolina 29690
MAILING ADDRESS:
Sunex Tools
P.O. Box 4215
Greenville, South Carolina 29608
6613a_man071504en.indd 2
7/15/04 5:15:35 PM
