9
CARPLAY
BOX
OEM
Monitor
OEM
Command
1. QDIS supplied LCD out cable from OEM Command to
sub-board “LVDS IN”
2. OEM LCD cable from back side of OEM Monitor to
sub-board “To Monitor”
3. QDIS supplied LVDS cable from sub-board “LVDS OUT”
to interface “LVDS OUT(B)”
Supplied Res. Touch in cable
EXT. touch
screen
Power/CAN in/out
Rear camera input *1
Front camera input *1
UART Touch Cable
Pin assignment
RX
TX
GND
* Please refer to next page
for power/CAN connection
Supplied Cap. touch in cable
Supplied touch out cable from sub-board
“Res. T/S OUT” to interface “T/S IN”
❶
❷
❸
