SR500ex PAPR
—
How to
Copyright © 2020 by The S.E.A. Group
9
Screw the filter combination into the filter
mounting so far that the filter will be in contact
with the gasket. Then turn it about 1/8 turn
further in order to ensure a good seal.
Fit one pre-filter into the filter holder.
Press the filter holder onto the particle filter. The
filters used must be of the same type, i.e. two SR
510 P3 or two SR 518 A2/SR510 P3, etc.
When filters are changed, both filters/combined
filters must be changed at the same time.
Correctly mounted pre-filter holder.
