Instruction for OC-Stand
OC-Stand is designed to work with OC/OC-Pro as an optional
accessory for portable use. Please make sure all safety
precautions of using the outdoor heaters are followed as in the
OC manual.
Follow the steps below to finish the assembly.
Step1: Fix Part3 onto Part4 using Screw4.
Step2: Fix Part2 onto Part3 by using 4 pieces of Screw2.
Step3: Lengthen Part1 first and then fix Part1 onto Part2 using
the remaining 4 pieces of Screw2.
Step4: Tighten Part1.
Step5: Make sure the heater has been pre-assembled with the
wall mounting bracket, and then fix Part5 onto Part1 using
Screw3.
Step6: Finish and you are ready to use the heater with the stand.
