Sundance Spas ALTAMAR, Owner'S Manual, Page: 49 / 96

Page 43
880 SERIES
10.0 SunTouch™ Control Panel Main Menu
10.1 SunTouch™ Welcome Screen
When power is first applied the SunTouch™ control panel will display a
welcome message and the current software revisions, Figures 10.1a.
Then the spa will begin a blow out cycle, Seciton 12.5 page 58.
Note: The start up menu will time out after approximately 3 seconds
and then change to the registration display in Section 10.2.
10.2 Register Your New Spa
Registering your spa is important in order to
validate your warranty, Figure 10.2a. In order
to register you will need to have the spa serial
number, Figure 10.2b, then you will need to
register online in order to receive a passcode.
The passcode must be entered on the control
panel.
If this option is skipped, you will be able to activate components, but
after 10 minutes, the screen will revert back to the registration screen.
This process will continue until the spa is registered and the passcode is
entered.
Note : The spa will still protect itself if an error is detected.
To register your spa you need to have
your spa serial number. The best time
to retrieve the serial number is when
the spa is being connected. You must
register your spa via the internet at
www.SundanceSpas.com.
Follow these steps to register your spa.
1. Using your home computer or other device, connect to the internet.
2. Go to www.SundanceSpas.com website to register your spa.
3. Click Owner Resources
Figures 10.1a
WELCOME
Connecting to Spa...
WELCOME
Spa 1.20 / Panel 2.10
Registration Lockout
Please register your spa at:
www.SundanceSpas.com
Once registered, enter your
spa serial # and registration
passcode here:
Enter #
Later
Figure 10.2a
Figure 10.2b
serial
nameplate
102°