Page 10
18. HDbaseT
- HD/UHD extender receiver.
Bottom Blue LED - indicates board power
Top Green LED - when lit indicates positive link to a HDBaseT transmitter
Left RJ45 Yellow LED - flashing = non-HDCP video transmitting/steady = HDCP video transmitting
Right RJ45 Green LED - Link from transmitter active
Warning: Do not connect HDbaseT to ethernet network based devices, damage to the HDbaseT receiver and/or the Ethernet
network device may result.
19. Emitter port
- Connect an emitter to control the SunbriteTV through the HDBaseT compatible transmiter which supports IR repeating.
20. Option Switches
- reserved for future use. Swith settings do not effect the HDBaseT operation at this time.
HDBase-T information
The Signature Series 4K Ultra HD incorporates an HDBaseT receiver based on the SnapAV Binary B-520-RX-320.
A front IR receiver is incorporated into the design to extend the IR via the HDBaseT Transmitter and Receiver installation.
The IR repeater is dedicated to the integrated B-520-RX-320 and cannot be used with any other IR extender.
Need to add text here with basic information about the supported resolutions with the built in HDbaseT module.
TV Installation – Rear Panel Connections
Connections continued
18
20
19
