background image

Page 38

When programming a DirectTV, local cable universal remote control or Control system, you may find that  SunBriteTV may not be on the 

list of TV manufacturers. If that is the case, your SunBriteTV supports SONY’s universal remote code.   

Programming Other Manufacturers’ Universal Remote Control Devices

SunBriteTV Pixel Quality Policy

SunBriteTV’s Pixel Quality Policy 

(Applicable to LCD TVs sold within USA and Canada only.)

SunBriteTV LCD screens are manufactured with rigorous standards to maintain optimal viewing. However, the LCD screen may 

have minor defects that appear as a small bright or dark pixel. This is common to all LCD screens used in display and television 

products, and is not specific to SunBriteTV.

Bright dots are dots that appear bright and unchanged in size when a LCD TV screen displays a black pattern.
Dark dots are dots that appear dark and unchanged in size when a LCD TV screen displays a pure red, green, or blue pattern.
Adjacent dots are pixels located directly next to each other.

Your SunBriteTV will be replaced under warranty if it meets one of the following criteria: 

—A total of 7 defective pixels, including both bright dots and dark dots are present. (This LCD screen has over a million pixels.)
—2 or more pairs of adjacent bright dots are present.
—3 adjacent bright dots are present.
—3 adjacent dark dots are present.
To locate defective pixels, the LCD panel should be examined under normal operating conditions, in its native display resolution, 

with a 90 degree viewing angle, from a distance of a approximately 20 inches. 

To qualify for replacement, a defective LCD screen must be reported to SunBriteTV within 60 days from the day the customer 

receives the TV.

For questions, please call our Customer Care Center at 800.331.4626.

Features Information and Instructions

Internal Thermostatically-Controlled Heater

The Internal Thermostatically-Controlled Heater keeps the unit warm in freezing temperatures and activates automatically when the 

SunBriteTV internal temperature sensor reads a temperature inside the unit of 32

O

 F. or lower.  The heater remains on until the internal 

temperature rises to at least 42

O

 F.  The heater provides a 20

O

 F. temperature rise, allowing the TV to safely remain in temperatures as low 

as -24

O

 F. The ventilation fans are not activated when the heater is running and will automatically activate when required.

Note:

 In order for the automatic heater to work properly, your SunBriteTV must have power applied at all times.

Extreme Climate Warning

If temperatures below -24

O

 F. are expected, we recommend that you bring your SunBriteTV inside to prevent damage to the LCD screen.

Summary of Contents for DS-4720L










































Reviews: