Page 10
TV Installation – Rear Panel Connections
TV Installation – Rear Panel Connections
13
14
15
Emitter Window:
Figure 15 shows an Emitter* installed. One end of the Emitter is to be mounted in
front of the IR Emitter Window. The other end is to be connected to an appropriate
control block*.
* Neither the emitter or control block are supplied by SunBriteTV. See instructions
that come with your IR Emitter and control block to determine how to make the
connection.
Important note:
SunBriteTV recommends using a high-output IR Emitter, such as
Xantech 282M.
Figure 15
IR Emitter placed over the IR Window
Cable end that will be attached to an
external control block is routed over the
Rubber Sealing Gasket of the Internal
Connect Source. See proper Internal
Connect Source instructions on Page 9.
1. UsB or 1/8 minijack
: This port is used for factory firmware upgrades.
2. HDmi (3):
HDMI connects to devices that use HDMI cable, such as Blue-ray or HD DVD player, or HD cable/satellite set-top box. This
connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device
for video.
3. Vga:
This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you
want sound out of VGA video source.
4. Vga stereo input:
This connection port is for people who want to provide audio to the TV when using a PC or DVI video device. The sources
use 3.5 mini-jack audio cable.
5. s-Video:
- Connects to devices that use S-video cables such as a VCR, camcorder or video game console.
6. Component (yPbPr2)
- This connection port is for DVD players or satellite/cable set-top boxes that use component cables. From left to
right, connect green, blue and red for video, and then connect white for left channel audio and red for right channel audio.
7. aV1
- Connects to devices that use composite video such as VCR or camcorder or video game consoles. Connect the video portion with
either the yellow connector or the S-Video connector. Do NOT connect both video connectors. Use the SOURCE button to select AV1 (CVBS) on
your MAIN SOURCE if you are using the yellow plug for video, use the SOURCE button to select AV1 (S-Video) on your MAIN Source if you are
using the S-Video connector to view this connection.
8. aV2 (Option)
9. sPDiF audio Out
- This connection is used for connecting a headphone or amplifier to the TV
10. analog audio Out
- This connection is used to connect headphones, stereo receivers and amplified speakers.
11. TV Tuner:
This connection is for digital or analog cable without the cable
box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to
both analog and digital channels. This connection uses coaxial RF cable.
12. speaker module Connector:
This port is for the sunBriteTV
Detachable speaker module only.
13. ir Window:
The Internal Infrared (IR) Control Window allows the TV to be
controlled from a remote system using IR commands.
14. rs232
- The RS232 connection allows the TV to be controlled from a
remote system using RS232 commands. (See Appendix A of this manual for
a list of RS232 control commands and Appendix B for a Control Cable Pinout
Diagram.)
15. 12 VDC
- This port is for the SunBriteTV FM Radio connector only.
1
3
4
6
9
11
2
5
7
8
10
12
