After each use
1. Turn the STEAM/DRY dial to DRY.
2. Turn the power off and remove the plug
from the power outlet.
3. Empty any remaining water from the water
tank.
4. Allow the iron to cool before winding the
cord around the built-in cord wrap.
Storage
Always store the iron on its heel rest.
NOTE: Do not store the iron with the soleplate
facing down, or in the carton.
Cleaning
To clean the exterior of your iron, wipe over
with a damp soft cloth and wipe dry.
Caution: Do not use harsh abrasives,
chemical cleaners or solvents to clean the
exterior of your iron as these will damage the
surface.
Cleaning the removable steam valve
To remove the steam valve, turn the STEAM/
DRY dial to clean, so that the steam valve
pops up. Gently scrub the tip of the valve
with a steel wool soap pad moistened in
warm water. Rinse and dry with a clean cloth.
Replace the steam valve and turn clockwise
to lock into position.
Cleaning the Teflon
®
Platinum Pro non-stick
soleplate
The non-stick coating reduces sticking of
fabrics and starches to the soleplate. Do
not iron over sharp objects such as buttons,
studs and zippers, as these will scratch the
surface.
Wipe the soleplate with a damp soft cloth
after each use. If polyester has burnt to the
soleplate, iron a damp cotton cloth while hot.
Caution: Do not use scouring pads, abrasives
or harsh cleaners to clean your Teflon
®
Platinum Pro soleplate, as these will scratch
and damage the surface.
To clean the steam holes
To remove build up from the steam holes
which may affect steam performance, use
a cotton wool tip moistened in methylated
spirits.
8
Care and Cleaning
Figure 2
