F
eatures
1. SPRAY
MIST
TM
Nozzle
2. Covered Water Fill Hole
3. Digital Fabric Selection Display
4. Steam Lever
5. Mode Button
6. SHOT OF STEAM
®
/ Vertical Steam Button
7. SPRAY
MIST
TM
Trigger
8. Soft Grip Handle
9. 360° Swivel Cord
10. See-Through Water Reservoir
11. Self Clean Button
12. Soleplate
13. Precision Tip
14. Anti Calcium System (Inside)
D
ry
I
ronIng
1. Ensure Steam Lever is turned to the
(Dry) setting.
2. Plug the cord into a 120-V
olt AC outlet.
3. Press Fabric Select Button to select desired fabic setting.
Allow iron to heat until the light under selected fabric
setting turns solid blue. While iron is heating, make sure it is sitting on a stable, protected surface. Light will blink until
temperature is reached.
NOTE: While Steam Lever is turned to the
(Dry) setting, you may still use the SHOT OF STEAM
®
or SPRAY
MIST
TM
features, as long as the Fabric Select Dial is set to wool, cotton, or linen. W
ater reservoir must be at least
¼ full of water.
F
Ill
Ing
W
ater
r
eservo
Ir
(use tap water)
1. Turn Steam Lever to
(Dry) and Fabric Select Dial to Off. Unplug
.
2. Lift the Water Fill Hole Cover
. Use the easy-pour measuring cup to fill the water reservoir with tap water through
the water fill hole. Do not fill water reservoir beyond maximum fill line.
3. Close the W
ater Fill Hole Cover completely after filling.
WARNING: To prevent the risk of burns, be careful when filling a hot iron with water
. Hot metal parts, hot water and
steam can cause injuries.
s
team
I
ronIng
1. Follow the instructions for “Filling the W
ater Reservoir”.
2. Fill W
ater Reservoir and plug the cord into a 120-Volt
AC outlet.
3. Turn Steam Lever to desired steam setting.
Only use Steam setting and/or Shot of Steam
®
feature with Wool,
Cotton or Linen fabric settings.
4. Press Fabric Select Button to select desired fabic setting.
Allow iron to heat until the light under selected fabric setting
turns solid blue. While iron is heating, make sure it is sitting on a stable, protected surface.
IMPORTANT:
When not ironing, always set the Steam Lever to
(Dry) and the Fabric Select Dial to OFF.
s
pecIal
F
eatures
s
pray
m
Ist
TM
F
eature
is a powerful water spray mist that dampens the fabric to aid in removing
wrinkles from heavy fabrics and for setting creases.
TO USE
: Press the Spray Mist
TM
Trigger firmly
.
/MD
Instruction Manual
Sunbeam
®
Turbo Steam
®
Iron
Notice d’emploi
Fer Turbo Steam
MD
Sunbeam
MD
www.sunbeam.ca
P.N. 174785
I
mport
ant
s
aFeguar
Ds
When using electrical appliances, basic safety precautions should always be
followed including the following:
Read All Instructions Before Use
• Use
iron
only
for
its
intended
use.
• To
protect
against
risk
of
electric
shock
, do
not
immerse
the
iron
in
water or
other
liquids.
• The Fabric Select Dial and Steam Lever should always be turned to OFF before plugging or unplugging
from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
• Do
not
allow
cord
to
touch
hot
surfaces.
Let
iron
cool
completely
before
storing.
Loop
cord
loosely
around
iron when storing.
• Always disconnect iron from electrical outlet when filling with water, cleaning, emptying or when
not in use.
• Do
not
operate
iron
with
a
damaged cord
or
if
the iron
has
been
dropped
or
damaged.
To
avoid
the
risk
of
electric shock, do not disassemble the iron. Take it to an authorized service center for examination
and/or
repair. Incorrect reassembly can cause a risk of electric shock when iron is used.
• Close
supervision
is
necessary for
any
appliance
being
used
by
or
near
children
. Do
not
leave
iron
unattended while plugged in, turned on or on an ironing board.
• Burns
can
occur
from
contact
with
hot
metal
parts,
hot
water
or
steam.
Use
caution
when
you
turn
a
steam
iron upside down – there may be hot water in the reservoir.
• If
the
iron
is
not operating
normally,
disconnect
from
the
power
supply
and
have
the
iron
serviced
by
an
authorized service center or call Customer Service at 1 800-667-8623.
• Your
SUNBEAM
®
iron is designed to rest on the heel rest. Do not leave the iron unattended.
Do not set the iron on an unprotected surface, even if it is on the heel rest.
• This
is
a high
wattage
appliance.
To
avoid
a
circuit overload,
do
not
operate
another
high
wattage
appliance on the same circuit.
• If
an
extension
cord
is
absolutely necessary,
a
15-ampere cord
should
be
used.
Cords
rated
for less amperage may overheat. Care should be taken to arrange the extension cord so that
it cannot be pulled or tripped over.
F
or
P
roducTs
P
urchased
in
The
u
niTed
s
TaT
es
and
c
anada
To reduce the risk of electrical shock, this appliance has a polarized plug
(one blade is wider than the other). This
plug fits a polarized outlet only one way; if the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact
a
qualified electrician.
Do
not
attempt
to
defeat
this
safety
feature.
SAVE THESE INSTRUCTIONS
3 Year Limited Warranty and Lifetime Limited Soleplate Warranty
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation
(Canada) Limited doing business as Jarden Consumer Solutions (collectively
“JCS”) warrants that for a period of
three years from the date of initial retail purchase, this product will be free from defects in material and workmanship.
JCS warrants the iron’s soleplate will be free from defects in material and workmanship for the life of the iron from
the date of initial retail purchase.
JCS, at its option, will repair or replace this product or any component of the product found to be defective during the
warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no
longer available,
replacement
may
be
made
with
a
similar product
of
equal
or
greater
value.
This
is
your exclusive
warranty. Do NOT attempt to repair or adjust any electrical or mechanical
functions on this product. Doing so will
void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.
Keep the
original
sales
receipt.
Proof
of
purchase
is
required to
obtain
warranty
performance.
JCS
dealers,
service
centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and
conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or
misuse of the product, commercial use, accident,
use on improper voltage or current, use contrary to the operating
instructions, disassem
bly, repair or alteration by anyone other than JCS or an authorized JCS service center.
Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes. Soleplate warranty
does not cover scratches or discoloration of the soleplate
finish and only applies as long as the iron generates
optimal heat.
What are the limits on JCS’s Liability?
JCS shall
not
be
liable
for
any
incidental
or
consequential
damages
caused
by
the
breach
of
any
express,
implied
or
statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability
or fitness for a
particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions
or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability
to use
the product
including
incidental,
special,
consequential
or
similar
damages
or
loss
of
profits,
or
for
any
breach
of
contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.
Some provinces,
states
or
jurisdictions
do
not
allow
the
exclusion
or
limitation
of
incidental or
consequential
damages
or
limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province,
state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you
have
any
question
regarding
this
warranty
or
would
like
to
obtain
warranty
service
, please
call
1.800.458.8407 and a convenient service center address will be provided to you.
In Canada
If you
have
any
question
regarding
this
warranty
or
would
like
to
obtain
warranty
service
, please
call
1.800.667.8623 and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions
located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada)
Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y
0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service
Department. PLEASE DO NOT RETURN
THIS PRODUCT
TO ANY OF THESE
ADDRESSES
OR TO THE PLACE
OF PURCHASE.
PLEASE DO NOT
RETURN THIS PRODUCT TO ANY OF
THESE ADDRESSES
OR TO THE PLACE
OF PURCHASE.
For product questions visit us online at www.sunbeam.ca or call 1.800.667.8623.
STOP
I
ronIng
t
Ips
(co
nti
nued
)
IRONING PANTS
• Begin
with
the
waistband
and
inseam
area,
then
pockets
and
cuf
fs.
• Pull
waistband
on
pointy
end
of
the
board,
as
if you’re
“dressing”
the
ironing
board.
Iron
upper-front
part
of
the
pants,
including the waistband.
• Place
pants
parallel
to
ironing
board
lengthwise
so
both
legs
are
facing
the
same
direction.
Iron
each
leg
by
moving
the iron back and forth along the pant leg.
• Take
cuf
f of
the
leg
and
bring
it over
towards
the
waistband
to
iron
the
inner
part
of
the
leg.
Repeat
these
2
steps for
the second leg.
Trouble Shooting
PROBLEM
CAUSE/SOLUTION
“Power” indicator light is blinking and
fabric setting light is off
• The
red
light
blinks
and
beeps
6
times to
indicate
that
the
iron
auto-
off function has been activated.
• To
stop
blinking
and
reset,
move
the
iron
back
and
forth
and
allow
to
re-heat until the indicator light turns solid blue.
Iron is not heating
• Ensure
the
iron
is
on and
the
light
below
fabric
setting
is
illuminated.
• Verify
unit
is
plugged in.
• Adjust
fabric
selection
to
the
correct
setting
for
your
garments.
Iron will not steam
• Ensure water tank level is at least ¼ full.
• Ensure
steam
lever
is
switched on.
• Press
Shot
of
Steam
®
button several times to prime.
Iron is leaking
• Only
fill
with
water
to
the
MAX
level.
• Allow
to
heat
for
at
least
2
minutes before
use,
and
wait
until
the
indicator light “Ready” has turned solid blue to indicate that it is
ready.
• Shot
of
Steam
®
button
has
been
pressed
too
frequently
. Only
use
shot of steam
®
button in 3 second intervals or less.
• Steam
Setting
and/or
Shot
of
Steam
®
but
ton
used with incorrect fabric
setting. Only use with W
ool, Cotton or Linen fabric settings.
• Empty
water
tank
after
each
use
and
turn
steam
lever
off.
Iron leaves spots/flakes on clothing
• Empty water tank completely after each use.
• Clean
soleplate
when
cool
with
a
wet, damp
cloth.
• Use
self-cleaning
feature
once
a
month.
• Refer
to
the
Anti-Calcium
System
section.
• Ensure
water
cup
used
to
fill the
iron
is
clean.
Wrinkles are not suf
ficiently removed
• Check
that
the
iron
is
set to
the
correct
fabric
setting.
• Use
Shot
of
Steam
®
or Spray Mist
TM
features to help remove
stubborn wrinkles.
Fabrics are getting an unwanted “shine”
• Use
an
ironing
cloth
or
a 100%
white
cotton
fabric
and
place
it between
the garment being ironed and the iron to prevent “shine”.
s
pecIal
F
eatures
(c
onti
nued
)
s
hot
oF
s
team
®
F
eature
provides an extra burst of steam for deep penetration of stubborn
wrinkles. You can use this feature while Dry or Steam ironing as long as the Fabric Select Dial is set to wool, cotton,
or linen. The water reservoir must be at least ¼ full of water
.
TO USE
: Place the iron on top of the wrinkle and press the Shot of Steam
®
button each time you would like an extra
burst of steam. The Shot of Steam
®
feature may be used continuously in approximately
3-second intervals.
v
ertIcal
s
hot
oF
s
team
®
F
eature
allows iron to function vertically as a garment
steamer.
TIP: When using vertical steam, hang clothing
on a hanger for best results. Hanging curtains and drapes may also
be steamed.
TO USE:
1. Ensure that the iron is heated up and the Ready indicator light has turned solid blue.
2. Hold iron vertically
near, but not touching the fabric you want to steam. Pull the fabric tight.
3. Press Shot of Steam
®
button in 3-second intervals as you move iron over wrinkles.
WARNING: To prevent burns, keep hands away from the area being steamed.
WARNING: DO NOT
steam garments while wearing them; this may result in injuries.
3-W
a y
m
otIon
s
mart
TM
a
uto
-o
FF
F
eature
Turns iron of
f if left in one position too long to avoid accidents.
IF YOU LEAVE IRON ON:
• If
auto-of
f activates
the
unit
will
beep
6
times and
the
red
light
will
blink
until
reset.
• Horizontally
without
moving
it,
or accidentally
tip
the
iron
over
, it
will automatically
stop
heating
after
30
seconds.
• V
ertically (on its heel rest) without moving it, the iron will automatically turn off after 15 minutes.
IMPORTANT:
When the auto-off feature has been activated,
the unit will beep 6 times and the indicator light will
blink.
TO RESET: Move iron back and forth and reheat until the “Ready” indicator light turns solid blue.
c
arIng
For
y
our
I
ron
a
Fter
u
se
TUR
NIN
G OFF I
RON
: T
urn S
tea
m Leve
r to
(Dr
y) a
nd F
abr
ic S
elec
t Dial t
o Off. U
nplu
g.
WARNING: NEVER
yank power cord when unplugging iron. This can damage the cord.
Empty water reservoir completely after each use.
s
torIng
y
our
I
ron
1. Turn of
f iron, unplug and allow to cool.
2. Empty water reservoir after each use for a longer iron life.
3. Loosely loop the power cord around the heel rest and store the iron on its heel rest.
IMPORTANT: Wrapping the
cord around the iron too tightly can damage the cord.
m
aInt
aIn
Ing
y
our
I
ron
u
sIn
g
s
elF
-c
lea
n
F
ea
tu
re
:
Use the Self-Clean feature once a month to maintain optimal iron performance.
1. Turn of
f and unplug iron.
2. Move Steam Lever back and forth to remove debris and minerals from Steam V
alve. This keeps water flowing into
the steam chamber.
3. Fill
water
reservoir
with
tap
water
to
MAX
line.
4. Plug in iron, press Fabric Select Button to select Linen setting and heat until the indicator light turns solid blue.
m
aInt
aIn
Ing
y
our
I
ron
(c
onti
nued
)
5. Turn of
f and unplug iron. Holding iron over a sink in a horizontal position, press Self-Clean Button and hold. W
ater
will begin dripping from the steam vents. Slowly rock iron side to side and front to back for 30 seconds. Dip nose
of the iron slightly below the rear to circulate water
. Release Self-Clean Button after one minute.
6. Open fill cap and empty remaining water
. Carefully dry soleplate with a towel.
7. Plug in iron and set Fabric setting to Linen and Heat for 2 minutes to dry out completely
. Set Fabric Select Dial to
Off, unplug the iron, and allow to cool.
CLEANING SOLEPLATE:
Clean
soleplate
after
every
30
uses,
or
more
frequently
if
starch is
used
or
build-up
starts
to accumulate. Before cleaning, ensure iron is unplugged and cool.
WARNING:
Do not
immerse
in
liquids or
use
abrasive
cleansers
or
scouring
pads
to
clean
the
soleplate.
This
will
damage the finish.
Type of Debris/Build-Up
Cleaning Recommendation
Light Dirt
Use a cotton cloth or terrycloth towel to wipe the soleplate with warm soapy water.
Hard Water Deposits
Use a cotton cloth or terrycloth towel to wipe the soleplate with a 50/50 vinegar/water
mixture.
Heavy Starch or Residue
Build-up
Use Hot Iron Cleaner or Mr. Clean
®
Magic Eraser
®
cleaning pad. Refer to the
manufacturer’s directio
ns included with these products for specific cleaner usage
instructions. Mr
. Clean
®
and Magic Eraser
®
are registered trademarks owned by The
Procter & Gamble Company.
a
ntI
-c
alcIum
s
ystem
Anti-calcium is a permanent system located inside the water reservoir to eliminate
impurities.
t
o
p
rolong
e
FFIc
Iency
, F
olloW
t
hese
s
teps
o
nce
a
m
onth
or
After Every 30 Uses
:
1. Turn of
f iron.
2. Add 1 teaspoon of salt to ¾ cup water and fill water reservoir with this solution.
3. Leave solution in water reservoir for 15 minutes, shake occasionally
, and then empty through the fill hole.
4. Fill water reservoir again with salt water solution, shake and empty after 15 minutes.
5. Fill water reservoir with fresh water to rinse and empty.
I
ronIng
t
Ips
• Before
ironing,
check
the
garment
label
and
follow
manufacturer
’s instructions.
If
no instructions,
start
with
a
low-heat
setting and test by ironing a small area, and gradually increase heat.
• Sort
garments
by
fabric
type.
Iron
articles
requiring
a low-temperature
setting
and
gradually
work
up
the
temperature
range.
• When
changing
from
a
high-temperature setting
to
a
lower one,
allow
5
minutes for
change.
• When
steam
ironing,
use
long,
slow
passes
over
the
fabric
to
allow
the
steam
to
penetrate
the
fabric
and
the
heat
of
the soleplate to dry the moisture.
• Iron
linen
garments
inside
out
to
prevent
shine.
An
ironing
cloth
or
cotton
fabric
can
be
used
to
reduce
shine.
• If
the garment
is
lined, use
a
low heat
setting.
• Ensure
zippers
are
closed
and
flap
is
flat. Iron
over
the
flap,
holding
the
garment
taut.
• Spray
starch
makes
the
job
easier
.
IRONING SHIRTS
• Begin
with
the
collar
and
work
toward
the
middle
from
the
outer
edges.
Iron
lengthwise,
not
in
circles.
• Lay
shoulder
over
narrow
edge
of
the
board
and
iron
one
side
of
the
front.
Then
iron
the
shoulder
, across
the
back
(below the collar line), the other shoulder and the remainder of the front.
• Iron
sleeves
and
cuf
fs, working
down
from
the
underarm
seams.
To remove creases, shift the double layer of sleeve
fabric and iron out.
• Iron
body
of
garment,
from
half
of
the
front
around
the
back,
then
second
half
of
front.
If
your shirt
does
not
open,
slip
over end of ironing board and iron front and back in turn.
/MD
For product questions:
Sunbeam Consumer Service
USA : 1.800.458.8407
Canada : 1.800.667.8623
©2014 Sunbeam Products, Inc., doing business as Jarden Consumer Solutions. All rights reserved.
In the U.S., distributed by Sunbeam Products, Inc., doing business as Jarden Consumer Solutions,
Boca Raton, FL 33431. In Canada, imported and distributed by Sunbeam Corporation (Canada),
Limited, doing business as Jarden Consumer Solutions, Brampton, ON L6Y 0M1.
Pour toutes questions concernant le produit:
Service à la clientèle de Sunbeam
Canada : 1.800.667.8623
États-Unis : 1.800.458.8407
©2014 Sunbeam Products, Inc., faisant affaire sous le nom de Jarden Consumer Solutions. Tous
droits réservés. Aux États-Unis, distribué par Sunbeam Products, Inc., faisant affaire sous le
nom de Jarden Consumer Solutions, Boca Raton, FL 33431. Au Canada, importé et distribué
par Sunbeam Corporation (Canada), Limited, faisant affaire sous le nom de Jarden Consumer
Solutions, Brampton (ON) L6Y 0M1.
Visit www.sunbeam.ca for an Ironing Guide and Ironing Tips
Vous trouverez le guide et les conseils de repassage au www.sunbeam.ca
Printed in China
Imprimé en Chine
GCDS-SUN33309-JC
For inquiries regarding recycling and proper disposal of this product, please contact your local
waste management facility.
Pour toute demande de renseignements en ce qui concerne le recyclage et l’élimination appropriée
de ce produit, veuillez communiquer avec l’installation de gestion des déchets locale.
1
2
4
6
5
8
3
9
13
12
11
10
7
Turbo Steam (Canada)_14EFM1.indd 1
3/20/14 9:42 AM