Sunbeam ST6650, Instruction Booklet

Page: 8 / 32

The VitaSteam features an Instant Steam
Function that will enable steam to be
generated in as little as 30 seconds. For this
feature to operate you must place the Instant
Steam Sleeve in position. The Sleeve concentrates a small amount of
water around the Exposed Heating Element,
quickly bringing it to boiling temperature to
produce steam, rather than heating all of the
water in the reservoir.
The Sleeve has a small cut out in the bottom
to allow water to flow into the contained
water area. When the Sleeve is in position
the cut out must be located at the bottom to
allow the water to flow in.
For more efficient steaming we recommend
that the appliance is always operated with
the Instant Steam Sleeve in position.
6
Guide to Instant Steam Function
Guide to Water Levels
Your VitaSteam relies on the water reservoir
being full of water to operate. Fill the water
reservoir with clean water only. The water
level must be between the ‘MIN’ (500 ml)
and ‘MAX’ (1400ml) markings.
When continuously cooking food with your
steamer ensure that the water level does not
fall below the ‘MIN’ marking (500ml).
Cutout
Instant
steam
valve
‘MAX’
‘MIN’