4
Using your StickMaster
®
Ultra
Important: Ensure that the stick mixer is
unplugged from the power outlet before
assembling or removing attachments.
1. Insert the motor housing into the hole on
the top of the shaft. See figure 1.
Twist to lock into place. See figure 2.
2. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
3. Lower the stick mixer into food and
depress the power button (I) or (II) at the
top of the motor housing.
With your stick blender, you can select the
optimal speed for the processing task, by
turning the speed control dial from 'low'
to 'high' and then depressing the power
button (I).
Note: Stick mixers are designed to operate
only when the power buttons remain
depressed.
4. For an extra boost of power during
operation, the turbo speed button (II) may
be depressed.
Note: The power button (I) should be released
when selecting turbo speed.
5. To stop the stick mixer, take your finger
off the power button or the turbo speed
button.
6. Turn the power off at the power outlet and
unplug the power cord from the outlet.
7. To detach the shaft, twist the shaft and
the motor housing until the two pieces are
separate. See Figure 2.
Figure 2
Figure 1
To lock
To unlock
Summary of Contents for SM8800 StickMaster Ultra
Page 30: ...Notes...