M
N
63
63
66
pivot wire
66
65
65
N1
N
Remove the following parts from the carton:
One
WARMING RACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(65)
One
TOP WARMING RACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(66)
Insert the long wire on the
WARMING RACK
(
65
) into the left side of the lid. Hold the
rack in a vertical position and insert right side into the lid.
To center the rack, slightly bend the pivot wires to adjust for a tight fit.
Lower rack and press the pivot wires into side holes. See detail
N1
.
Insert the long wire on the
TOP WARMING RACK
(
66
) into the upper holes in lid.
Hook the top pivot wire into bottom rack and to center, slightly bend wire for tight fit.
See detail
N1
.
(Pg. 12) 1141-1986
M
Remove the following parts from the carton:
Two
COOKING GRIDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(63)
Set the
COOKING GRIDS
(
63
) into the bottom casting.
long
wire
long
wire
pivot wire
pivot wire
Summary of Contents for SD113232
Page 43: ...Pg 15 1141 1986 Notes Notas...
Page 44: ...Pg 16 1141 1986...