12
Mode button
Each time MODE button is pressed, the operation
mode is changed in sequence:
COOL: COOLING
FAN ONLY
ENERGY SAVING
COOLING
Operating Instructions
Control Panel
You can easily operate this air conditioner by pressing
relevant button on the control panel as well as the
remote control.
F
Indication symbols of LED on control panel:
High fan speed
Medium fan speed
Low fan speed
Auto fan speed
Cooling
Fan only
Display set temp
Display set timer
Timer
Above LED lights on when the relevant mode is in used.
Energy-saving
NOTE:
Temperature setting range is from19
(66
) to 31
(88
).
Fan Speed button
Used to select fan speed in sequence auto, low,
medium and high.
Timer button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays
the remaining time to turn off the unit for only
12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds,
OFF TIMER will be canceled.
If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you wantto cancel
ON TIMER, press TIMER button.
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature LED display will alternate between
and
.
Button
Electronic control panel model
Heating
HEAT: COOLING
FAN ONLY
HEATING
ENERGY SAVING
COOLING
h
Fan
Speed
Mode
Timer
Airconditioner
Button
The air conditioner will be started when it is energized or will
be stopped when it is in operation, if you press this button.
When the air conditioner is heating, allow 3 minutes after you
press this button.
NOTE:
After setting the mode, allow 3 minutes before
switching to another mode.
In the FAN ONLY Mode, Room Temperature display range
is from 0
(32
) to 38
(99
).
Room Temperature below 32
,the Temperature display L0.
Room Temperature above 99
,the Temperature display H1.
