![background image](http://html1.mh-extra.com/html/sunbeam/sca052mwb1/sca052mwb1_user-manual_1393424009.webp)
T hermostat knob
Mode knob
When using F AN control, turn slowly allowing unit
to adjust.
When using T HE R MOS T AT , be sure to allow three
minutes before changing temperature. Adjusting
too quickly may cause an overload resulting in a
blown fuse.
C AUT ION
!
!
MODE
F ig.9
T he mode knob controls fan speeds and cooling
speeds. To set desired cooling temperature, simply
rotate the mode knob dial to the appropriate
setting. S ee F ig. 9.
L OW F AN will circulate the air at a minimum speed
without cooling.
HIG H F AN will circulate the air at a maximum speed
without cooling.
L OW C OOL provides cooling, automatically with
minimum air circulation. R ecommended for night-
time use.
HIG H C OOL provides cooling, automatically with
quick cooling or for extremely hot days. Once room
is cooled, reduce setting to L OW C OOL .
NOT E : After setting the mode, allow 3
minutes before switching to another mode.
OF F will completely shut-off the unit.
T HE R MOS T AT
T he thermostat automatically controls the cooling
cycle (compressor) of the air conditioner to maintain
room temperature. However, the fan motor will
continue to operate after the compressor (cooling
cycle) is completed. S ee F ig.9.
Operating Ins tructions
Mechanical control model
F ig.10
F resh Air
Vent Lever
F res h Air Ventilation is usually kept in the closed
position. Use only when clearing smoke and/or
odors from the room. P ull to open. (S ee F ig.10).
8
All manuals and user guides at all-guides.com