IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY
DANGER:
TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND
PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE
FOLLOWING INSTRUCTIONS:
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.
4. THIS PAD IS NOT TO BE USED ON OR BY AN INVALID, A SLEEPING OR
UNCONSCIOUS PERSON, A PERSON WITH DIABETES, OR A PERSON WITH POOR
BLOOD CIRCULATION.
5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING. CHECK SKIN UNDER
PAD FREQUENTLY.
7. DO NOT USE IN AN OXYGEN ATMOSPHERE.
8. DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.
9. DO NOT BUNCH, SIT ON OR AGAINST OR CRUSH PAD-AVOID SHARP FOLDS.
10. NEVER PULL THIS PAD BY THE SUPPLY CORD.
11. DO NOT USE THE CORD AS A HANDLE.
12. THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT ADULT SUPERVISION.
13. PLACE PAD ON TOP OF AND NOT UNDER THE PART OF THE BODY NEEDING HEAT.
14. USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT. UNPLUG WHEN NOT IN USE.
DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
15. DO NOT TAMPER WITH THIS PAD IN ANY WAY.
16. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON THIS PAD DOES
NOT FUNCTION SATISFACTORILY, SEE WARRANTY FOR CONSUMER SERVICE
INFORMATION.
17. DO NOT USE THIS PAD WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS,
ESPECIALLY ONES THAT CONTAIN HEAT-PRODUCING INGREDIENTS. SKIN BURNS
COULD RESULT.
18. DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD IS DAMAGED.
19. NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY IF CHILDREN ARE
PRESENT.
20. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING MAY DAMAGE CORD
AND INTERNAL PARTS.
21. WHEN NOT IN USE, STORE THE HEATING PAD IN THE ORIGINAL PACKAGING, IN A
DARK, COOL, DRY PLACE.
22. SAVE THESE INSTRUCTIONS.
THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO
REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED
OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE
PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY
FEATURE IN ANY WAY.
Figure 2
A. Control Connector
B. Pad Connector
A
B
Figure 3
A
C
D
E
F
A. Display
B. Power Button
C. Auto Off Button
D. Auto Off Indicator
E. Heat Meter
F. Heat Setting
Buttons
B
A
B
Figure 1
HOW TO USE YOUR XPRESSHEAT
TM
CONTROLLER
Make sure Control Connector is securely attached to the Pad Connector (Figure 2). Push
both parts together for a tight fit.
NOTE: Control must be connected to heating pad before plugging unit into outlet.
1. After control is connected to pad, plug into 120V AC electrical outlet.
2. To turn the pad on, press the Power Button. Then select from 6 heat settings by
scrolling to the desired setting with HEAT
▲
or HEAT
▼
buttons. The light ring around
the controls, called the Heat Meter, will light up one side at the time, indicating
progress as the pad heats up. All four sides of the Heat Meter will light up within 30
seconds of powering up, indicating that the heating pad is warm and ready for use.
3. To turn the pad OFF, press the Power Button one more time. The
heating pad and lights of the Heat Meter will turn off.
4. DO NOT SIT ON OR AGAINST OR CRUSH PAD – AVOID FOLDING DURING USE.
5. DO NOT USE WHILE SLEEPING.
6. SEE ADDITIONAL WARNINGS.
Your Sunbeam Health Rebound
TM
Heating Pad with XPressHeat
TM
features a unique
fast-heat technology in which you will feel heat in 30 seconds - for faster pain relief!
AUTO-OFF FEATURE
Your heating pad controller includes a selectable Auto-Off feature. By pressing the “Auto
Off” button, you can set the timer to “Stay On” continuously or to shut down after 2 hours
of continuous use. NOTE: After a power outage, the Auto-Off feature automatically resets
the timer.
A. Machine washable
Rebound
TM
Heating Pad
B. XPressHeat
TM
controller with
selectable auto-off
