Sunbeam’s Safety Precautions.
Sunbeam are very safety conscious when designing and
manufacturing consumer products, but it is essential that
the product user also exercise care when using an electrical
appliance. Listed below are precautions which are essential
for the safe use of an electrical appliance:
• Read carefully and save all the instructions provided
with an appliance.
• Always turn the power off at the power outlet before
you remove a plug. Remove by grasping the plug - do
not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by your
electricity supplier or qualified technician.
• Always use your appliance from a power outlet of the
voltage (A.C. only) marked on the underside of the
appliance.
• Close supervision is necessary when your appliance is
being used near children or infirm persons.
• Never leave an appliance unattended while in use.
• Young children or infirm persons should be supervised
to ensure that they do not play with the appliance.
• Do not use an appliance for any purpose other than its
intended use.
• Do not place an appliance on or near a hot gas flame,
electric element or in a heated oven. Do not place on
top of any other appliance.
• Do not let the power cord of an appliance hang over
the edge of a table or bench top or touch any hot
surface.
• Do not immerse in water.
• For safety reasons and to avoid maintenance by
unskilled persons, some appliances are ‘sealed’ using
tamperproof means as specified by S.A.A. (Standards
Association of Australia). Such appliances should always
be returned to the nearest Sunbeam Service Centre or
appointed Service Agent for adjustment or repair if
required.
• Do not operate any electrical appliance with a damaged
cord or after the appliance has been dropped or
damaged in any manner; If damage is suspected, return
the appliance to the nearest Sunbeam Appliance
Service Centre for examination, repair or adjustment. As
a service to Customers, Sunbeam Appliance Service
Centres will carry out a free check on your appliance to
ensure it is electrically safe.
• For additional protection Sunbeam recommend the use
of a residual current device (RCD) with a tripping
current not exceeding 30mA in the electrical circuit
supplying the power outlet in use.
• This water filter must only be used with
municipally treated tap water. Do not
attempt to filter untreated, raw water or
water of unknown quality.
• Filter replacement is essential for the product
to perform as represented.
• Do not use hot water in this appliance
(Maximum 38˚C; Minimum 1˚C).
• To protect against electric shock do not place
the cord plug or appliance in water or other
liquid.
• Always place appliance on a flat, level
surface.
• Always unplug the appliance before
changing the filter.
If you have any concerns regarding the performance and use of your appliance, please ring our Toll Free number
(Australia only) 1800 025 059. New Zealand - contact the Sunbeam Office in Auckland on 09 912 0747.
Ensure the above safety precautions are understood.
SAFETY PRECAUTIONS FOR ALL ELECTRICAL APPLIANCES
SAFETY PRECAUTIONS FOR YOUR SUNBEAM PURE SOURCE WATER FILTER SYSTEM.
