Heading
Not enough froth when Frothing jug.
For best texturing results use a
texturing the milk
stainless steel jug and if possible
refrigerate or run the jug under
cold water before use.
During the texturing process
Start again with fresh, chilled milk.
the milk has been over heated
and boiled.
The brewing unit
The brewing unit is not in its
Leave the machine switched on
cannot be removed
normal position.
and adjust the coffee bean hopper
to the pre-ground coffee position.
Then switch off the machine and
remove the brewing unit. See page
33, Removing the coffee brewing
unit.
The brewing unit
Brewing unit is not closed
Turn the white service lever
cannot be inserted
correctly.
upwards as far as it will go. The
ejection lever will fold back and the
brewing unit closes. See page 33,
Inserting the brewing unit.
The locking lever behind the
Push the locking lever upwards and
service door is not in the up
insert the brewing unit. See page
position.
33, Inserting the brewing unit.
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Trouble Shooting Guide continued
44
Summary of Contents for Intuitive EM8910
Page 2: ......
Page 37: ...35 Cleaning the coffee brewing unit continued Figure 54 Figure 57 Figure 55 Figure 56 1 2 3 ...
Page 49: ...Notes ...
Page 50: ...Notes ...
