background image

1

  If you have any concerns regarding the performance and use of your appliance,  

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

  Ensure the above safety precautions are understood.

  Sunbeam is very safety conscious when  

designing and manufacturing consumer products, 

but it is essential that the product user also 

exercise care when using an electrical appliance. 

Listed below are precautions which are essential 

for the safe use of an electrical appliance:

•  Read carefully and save all the instructions 

provided with an appliance.

•  Always turn the power off at the power outlet 

before you insert or remove a plug. Remove 

 

by grasping the plug - do not pull on the cord.

•  Turn the power off and remove the plug 

 

when the appliance is not in use and  

before cleaning.

•  Do not use your appliance with an extension 

cord unless this cord has been checked  

and tested by a qualified technician or  

service person.

•  Always use your appliance from a power 

 

outlet of the voltage (A.C. only) marked 

 

on the appliance.

•  This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they 

have been given supervision or instruction 

concerning use of the appliance by a person 

responsible for their safety. 

•  Children should be supervised to ensure that 

they do not play with the appliance.

•  The temperature of accessible surfaces may be 

high when the appliance is operating.

•  Do not use an appliance for any purpose 

 

other than its intended use.

•  Do not place an appliance on or near a hot gas 

flame, electric element or on a heated oven. 

•  Do not place on top of any other appliance.
•  Do not let the power cord of an appliance hang 

over the edge of a table or bench top or touch 

any hot surface.

•  Do not operate any electrical appliance with 

a damaged cord or after the appliance has 

been damaged in any manner. If damage is 

suspected, return the appliance to the nearest 

Sunbeam Appointed Service Centre 

 

for examination, repair or adjustment. 

•  For additional protection, Sunbeam 

recommend the use of a residual current 

device (RCD) with a tripping current not 

exceeding 30mA in the electrical circuit 

supplying power to your appliances.

•  Do not immerse the appliance in water 

 

or any other liquid unless recommended.

•  Appliances are not intended to be operated 

 

by means of an external timer or separate 

remote control system.

•  This appliance is intended to be used in 

household and similar applications such 

as: staff kitchen areas in shops, offices and 

other working environments; farm houses; by 

clients in hotels, motels and other residential 

type environments; bed and breakfast type 

environments.

Sunbeam’s Safety Precautions

Summary of Contents for HE4100













Reviews: