7
Important Notes:
• Spots and marks on the surface of the
burrs are part of the hardening process.
These marks do not affect the performance
of the grinder or the taste of the coffee.
• Ensure the coffee grinder is switched off
and unplugged from the power outlet prior
to cleaning.
• Do not immerse the motor base of the
coffee grinder in water.
• Do not immerse any part of the burr
assembly in water or any other liquid.
• Do not place any parts of the coffee grinder
in the dishwasher.
• Do not use abrasive cleansers or scouring
pads.
Cleaning the base and coffee container
1. Clean the motor base exterior using a
damp soft sponge with mild detergent and
wipe dry.
2. Wash the bean hopper (once removed) and
coffee container in warm soapy water, then
rinse and dry.
Cleaning the burrs
If the coffee grinder is used frequently (every
day), the burrs need to be cleaned every
three weeks to ensure best performance of
the coffee grinder. Regular cleaning helps
the burrs achieve consistent grinding results,
which is especially important when grinding
coffee for espresso.
NOTE:
ALWAYS empty all the coffee beans
before removing the bean hopper.
This can be done by simply turning the
grinder upside down and emptying the beans
into a container
1. Ensure the coffee grinder is switched off
and unplugged from the power outlet.
2. To remove the bean hopper with top burr
and collar from the grinder base, turn the
collar anti-clockwise until it stops.
See figure 7.
3. Press and hold down the ‘UNLOCK’
button at the rear of the grinder base and
continue to turn the collar anti-clockwise
until the notch on the collar is aligned with
the arrow on the rear of the grinder.
See figure 8.
Care and Cleaning
Figure 7
Figure 8
