Sunbeam GC7200/B, Instruction Booklet

Page: 1 / 20

Please read these instructions carefully and retain for future reference
Instruction Booklet
NOTE: TRIM MARKS ARE TO BE USED ONLY AS A GUIDE FOR BLEED
PMS
BLACK
FILE SPECS
Client SUNBEAM
Job No. 76577
File Name TA8200 Instruction Booklet.ai
OP BK
Date 19.08.09
PLEASE READ
Please check this file carefully and read all instructions on artwork before commencing this job. If clarification is required,
please contact energi design prior to proceeding to final separations. Please take colour specifications from this markup,
not disk art. Dieline and markup do not print. Please trap all artwork where necessary.
APPROVAL
Date
Account Manager
Designer
Finished Artist
Please check this proof carefully and sign if approved.
By signing, you accept full liability for its accuracy.
Client Name
Client Signature
Please check film and proof carefully. All care and responsibility has been taken
with the preparation of this material however the final approval responsibility
rests with you, our valued client. Liability: the client/printer has a duty of care
to notify energi design if any anomalies are noticed prior to printing. In such
event energi design is released from all warranties and liabilities regarding the
form and content of the artwork, film, proofs and plates. In any other event
energi designs' liability shall not exceed the cost of the artwork film, proofs
and plates. Digital files remain the property of energi design pty ltd.
S S E C O R P G N I T N I R P S R U O L O C
Flexo
Litho
Gravure
Screenprint
GC7200/B