How to make a Bag from a FoodSaver
®
Roll
1 Place appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2 Pull out enough bag material to hold item
to be vacuum packaged.
3 Cut Roll to desired length, plus 7.5cm.
4 Open FoodSaver
®
lid. The lid may be
locked. To release the locks press in the
side locks.
5 Place one open end of the bag material
across the sealing strip and close lid.
(Do not place edge of bag into vacuum
channel when sealing bags)
6 Lock lid by pressing on corners of lid
until each latch clicks.
7 Press the Seal Button. When the seal
indicator light turns off, open lid and
remove bag.
How to Vacuum Package with FoodSaver
®
Bags
1 Place appliance on a flat, dry surface
and plug the supply cord into a standard
electrical outlet.
2 Place item(s) in bag, allowing at least
7.5cm of space between bag contents
and top of bag.
3 Open appliance lid and place open end of
bag into the Vacuum Channel.
4 Close and lock lid. To lock, press on
corners of lid until each latch clicks.
5 Press 'Vacuum and Seal' button
Wait 20 seconds before vacuuming and / or
sealing again.
SEALING STRIP
Press
8
Using your FoodSaver
®
VAC440
SEALING STRIP
VACUUM CHANNEL
SEALING STRIP
VACUUM CHANNEL
SEALING
STRIP
Press locks on sides
to unlock
