Care and Cleaning
This Feel Perfect heat pad features
waterproof heating elements, making them
fully immersible and safe to wash by hand
or machine.
Before cleaning your heat pad,
ensure that the controls are unplugged from the
heat pad.
Spot cleaning
Sponge the affected area using a neutral
wool detergent or mild soap flakes mixed with
lukewarm water. Sponge twice with clean
water to remove detergent. Remove excess
water by compressing the wet area between
two towels.
Hand washing
Wash the heat pad in lukewarm water with a
neutral wool detergent or mild soap flakes.
Soak for five minutes, then gently squeeze
the soapy water through the fabric. Rinse
thoroughly in clean, lukewarm water then
drain excess water from the heat pad.
Do not wring.
Machine washing
Take your heat pad to a commercial laundry
or wash in a domestic washing machine.
Wash on WOOL or DELICATES cycle with a
neutral wool detergent or mild soap flakes,
below 40°C. Do not use high speed or extra
spin cycles.
Line drying
Drape the heat pad across several lines of
your clothesline. Do not use pegs on the
wired areas. Do not dry with a hairdryer or
heater. Ensure that the heat pad and control
sockets are completely dry before using
again.
Machine drying
Tumble dry your heat pad on LOW setting
for 15 minutes MAXIMUM. Smooth the heat
pad by gently pulling any creases out of the
fabric. Line dry to ensure the heat pad and
control sockets are completely dry before use.
Do not dry with a hairdryer or heater.
Storing your heat pad
Roll or fold your heat pad loosely and store
in a blanket bag or the bag it was supplied
in. Avoid pressing sharp creases into the heat
pad. Do not place heavy items on top of your
heat pad when storing.
Checking your heat pad
Examine the heat pad frequently for signs of
wear or damage. If there are any such signs
or if the heat pad has been misused, return it
to your nearest Sunbeam Service Agent prior
to any further use.
7
