6
Using your Heat Pad
• Remove all packaging
• Ensure the power button on the controller
is in the off position (not pressed in)
• Connect the controller to the heat pad
• Insert the plug into the power outlet and
switch on
• The heat pad will automatically default to
setting 5 for rapid heating, and begin to
heat up.
• Setting 5 is for heat up only. Do not use
this setting for continuous or overnight use.
• Place the heat pad behind your back or
neck whilst sitting or lying on a couch,
chair or bed. This versatile heat pad is
a cozy and comfortable addition to any
lounge or bedroom.
• You can use the sleeve to secure the heat
pad to a chair back or around your arm or
leg.
• To reduce the warmth, switch to a lower
heat setting. For any continuous or
overnight use, select from settings 1-4
only.
Note:
If the blue standby indicator light
on the controller begins to flash, turn the
controller off and check that the controller
is properly connected to the heat pad. If the
blue standby indicator continues to flash
after turning the controller back on, contact
your local Sunbeam Service Agent.
Auto off function
• The heat pad features an auto shut off.
After 3 hours operation, the blue standby
indicator light will show to indicate the
heat pad has switched itself off.
Using your Heat Pad
