Product Improvement Centre
EM0480 Recalibration Guide
Page 1 of 3
Step 1
Ensure the coffee grinder is switched off and
unplugged from the power outlet. Remove the
bean hopper from the motor base, push down
and turn anti-clockwise, see figure 1.
Step 2
To remove the top burr turn the grind
adjustment collar in an anti-clockwise
direction until it stops, see figure 2.
Note:
The top burr can only be removed
when graphic arrow on the grind adjustment
collar is aligned with the arrow on the motor
base.
Step 3
Press and hold down the “UNLOCK” button at
the rear of the motor base and with the other
hand turn the grind adjustment collar anti-
clockwise until the graphic arrow on the collar is
aligned with the arrow on the motor base, see
figure 3.
Figure 1
Figure 2
Figure 3
