5
DISCLAIMER:
iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod” and “Made for iPhone,” means that an electronic accessory has been designed to connect
specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Cr1003
QuiCK referenCe Guide
14
9
5
7
6
8
13
4
3
2
12
11
10
15
usB Charger:
The CR1003 has a
courtesy USB 2.0 port located on the
front of the unit. This USB provides up
to 500mA current to charge a portable
device. To use, connect a USB cable
(not included) to your device and then
connect it to the USB port.
NOTE: Some devices may not charge
with the USB port. Please review your
device’s instruction book for details on
charging requirements.
1
1.
iPhone or iPod dock:
To dock your iPhone or iPod, turn
the dock adjust wheel all the way to the back. Gently dock
the device and adjust the wheel until it’s snug against the
back of the iPhone or iPod. The dock will charge and play
an iPhone or iPod.
2.
USB Charger:
Connect a USB cable from your device
to the USB port to charge it.
3.
Volume Wheel:
Adjust the wheel clockwise to increase
volume, counter clockwise to decrease volume.
4.
Music Button:
Press button to select between 4 music
options: AM Radio, FM Radio, Aux (device must be
plugged into Auxiliary Audio Jack and turned on) or iPod
(iPod or iPhone must be in dock).
5.
Power Button
6.
Seek Button:
Press to automatically seek the next radio
station when in AM or FM radio mode.
7.
White Noise:
Press to turn White Noise sound
ON
or
OFF
.
8.
Bright:
Press to select one of 3 display brightness
levels: Low, Medium or High.
9.
Alarm Set:
To set alarm sound, press the “Alarm Set”
button and follow the voice instructions. The voice will
guide the guest to select an alarm time by using the
“Set” wheel and pressing “Enter.”
10.
Alarm Sound:
To set alarm sound, press the “Alarm
Sound” button and follow the voice instructions. The
voice will guide the guest to select an alarm sound
(Buzzer, Sound 1, Sound 2, Radio or iPod) by using the
“Set” wheel and pressing “Enter.”
11.
Set Wheel/Enter Button:
Turn “Set” wheel to review
options and press enter button to select an option.
12.
Alarm ON/OFF Button:
Press to turn alarm ON or OFF.
Voice response and a display icon will confirm selection.
13.
Nap Button:
To set nap, press the “Nap” button and
follow the voice instructions.
14.
Auxiliary Audio Jack:
Plug into MP3 device to play music.
15.
Snooze Button:
Lights when alarm sounds.
Summary of Contents for Elite CR1003-005
Page 20: ...20 NOTES NOTAS NOTES...
