10
Using your Eco Jet continued
Fitting the round brush
The round brush can be used in conjunction
with the standard nozzle, the flexible
extension nozzle or fitted directly to the
steam outlet on the Eco Jet.
1. Fit the round brush to any of the above
attachments or directly to the steam outlet
by aligning the inner hexagonal sides of the
round brush with the tip of the attachment.
Push the round brush firmly onto the
attachment at the desired angle of use.
2. If using the round brush with one of the
above attachments, fit the round brush to
the attachment (according to step 1) then
follow the relevant instructions for fitting
that attachment to the Eco Jet.
3. To remove the round brush, simply pull
firmly.
Note:
Do not use on coarse surfaces such as
tile grout or cement for extended periods as
this may cause damage to the bristles.
Fitting the curved nozzle
The curved nozzle can be used in conjunction
with the standard nozzle, the flexible
extension nozzle or fitted directly to the
steam outlet on the Eco Jet.
1. Fit the curved nozzle to any of the above
attachments or directly to the steam outlet
by aligning the inner hexagonal sides
of the curved nozzle with the tip of the
attachment. Push the curved nozzle firmly
onto the attachment at the desired angle of
use.
2. If using the curved nozzle with one of the
above attachments, fit the curved nozzle to
the attachment (according to step 1) then
follow the relevant instructions for fitting
that attachment to the Eco Jet.
3. To remove the curved nozzle, simply pull
firmly.
Fitting the flexible extension nozzle
The flexible extension nozzle can be
used in conjunction with any of the other
attachments.
1. Attach the flexible extension nozzle to
the Eco Jet by pushing it onto the steam
outlet, aligning the arrow at the top of the
attachment with the join line above the
steam outlet. Turn the attachment in the
direction of the arrow until it locks into
place and the arrow on the attachment
aligns with the double line marked on the
side of the steam outlet.
Note:
Fit the desired attachment to the
flexible extension nozzle according to
the relevant instructions for fitting that
attachment to the Eco Jet.
2. To remove the flexible extension nozzle,
twist the attachment back against the
direction of the arrow. When the arrow
engraved on the attachment is aligned with
the join line above the steam outlet, pull
the attachment firmly to remove.
Fitting the adjustable shoulder strap
Attach the shoulder strap to the Eco Jet by
clipping the ends of the strap to the shoulder
strap hooks on the body of the unit. Adjust to
the preferred length using the buckle on the
strap.
