The control panel can be cleaned by using a lightly dampened cloth and dry thoroughly.
The exterior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect Against Freezing
1. Cut off electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain water from the inlet pipe and water valve. Use a pan to catch the water
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to
water in sump.
remove
Please take frost protection measures
.
for dishwashers in winter conditions After each cycle please do
the following:
Inspect the filters for residue/build up after each use.
By unscrewing the coarse filter you can remove the filter system. Remove any food remnants and clean the filters under
running water.
The entire filter assembly should be cleaned once a week.
Cleaning The Filter
Cleaning the Door
To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figures
in the last page and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward.
Clean filters gently. They are susceptible to damage. Damage to the filter may result in reduced
performance of the appliance.
To clean the edge around the door, you should use only a soft warm,
damp cloth. To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner of any kind.
Never use a spray cleaner to clean the door panel as it may damage the door lock
and electrical components.
Abrasive agent or some paper towel should not be used because of the risk of
scratching or leaving spots on the stainless steel surface.
12
If your dishwasher does not work because of ice/winter conditions, please contact a qualified service person.
