![background image](http://html1.mh-extra.com/html/sunbeam/dwsb3607bb/dwsb3607bb_instruction-manual_1393660012.webp)
It is dangerous to open the door
, because the hot water may scald you.
mid-cycle
When the
cycle has finished, the buzzer of dishwasher will sound 8 seconds, then stop. Turn off the appliance
using the On/Off button, shut off the water supply and open the door of the dishwasher.
Since the appliance is on standby, it will power off
after 30 minutes
without any operation.
Wait a few minutes before
unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to
breakage. They will also dry better.
wash
automatically
Turn Off the Dishwasher
1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap.
All panel lights should be off, indicating the cycle has ended.
Open the Door Carefully
Hot dishes are
The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. Dishes will be cooler
and drying will be improved.
susceptible to breakage
.
Unloading the Dishwasher
It is normal that the dishwasher is wet inside.
10
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door.
After the spray arms stop moving, you can open the door
completely.
2
3
Open the door
to stop the washing.
carefully
1
4
5
6
Premise: You can still modify the wash cycle if the cycle has just started. If cycle has begun the
detergent may have already been released and the appliance may have already drained the wash
water. If this is the case, the detergent dispenser must be refilled.
(See the section titled "Filling the Rinse Aide Dispenser").
To change the
, press
machine will be in standby mode, then you can change the program to the desired cycle setting.
See the section entitled Starting a Wash Cycle.
.....................................
b) The display shows no blinking lights ...........On pause.
the
a) All phase lights off
On standby.
wash cycle
program selector button for more than three seconds and the
The lights indicate the program/cycle phase.
c) The display shows blinking lights ............... Running.
Press the Start/Pause button.
Press the Start/Pause Button and the dishwasher will
after 10 seconds.
resume
If you open the door mid-cycle, the machine will pause.When you close the door, press Start/Pause to resume cyele.