Connecting machine to power source
Always make sure that the machine is unplugged from
power source and the main switch is on (Off) “0” when
the machine is not in use and before inserting or
removing parts.
- This machine is equipped with polarized plug which
must be used with an appropriate electrical outlet.
- Connect the machine to a power source as illustrated
(1/2).
-The power switch is located above the terminal box.
Your machine will not operate unless the switch is on
”I”. (1)
-Sewing light turns on automatically when the main
switch is on “I”.
-To start the machine, press the foot control (3). The
speed of the machine is regulated by the amount of
pressure exerted on the foot control.
CAUTION:
Consult a qualified electrician if in doubt as to connect
the machine to power source. Unplug power cord
when machine is not in use.
ATTENTION:
09
