*The blind hem foot is a standard accessory.
Set the machine as illustrated.
a. Stitch width
b. Stitch length
c. Presser foot
d. Stitch pattern
Blind hem for stretch fabrics. Position “D”
on selection dial.
Blind hem/lingerie for firm fabrics. Position
“E” or “F” on selection dial.
Blind hem / lingerie stitch
It takes practice to sew blind hems. Always make
a sewing test first.
Fold the fabric as illustrated with the wrong side
uppermost. (1) Place the fabric under the foot.
Turn the handwheel forward by hand until the
needle swings fully to the left. It should just
pierce the fold of the fabric. If it does not, adjust
the stitch width accordingly. (2) Adjust the
guide (3) by turning the knob (4) so that the
guide just rests against the fold. Sew slowly, by
pressing the foot control lightly guiding the
fabric along the edge of the guide.
NOTE:
25
