Waiting on Front
Cover from Energi
Waiting on Front
Cover from Energi
5
4
Parts & Accessories
Trigger-Release Control Probe
The heat control probe is thermostatically
controlled to deliver perfect cooking control.
The indicator light switches 'on' when it
is heating. When the frypan has reached
the desired temperature the indicator
light switches 'off'. The indicator light will
then cycle 'on' and 'off' as the thermostat
maintains the set temperature.
The heat control probe is ergonomically
designed with a handy trigger-release. Simply
hold the probe and squeeze the trigger with
your thumb to remove it.
Heat control probe with trigger release
Usage Instructions
Before First Use
Before using your Frypan for the first time,
remove all packaging and promotional
materials from the product and control probe.
With the control probe detached, wash with
warm soapy water using a mild household
detergent.
Rinse thoroughly and dry. Make sure the
interior of the probe inlet is fully dry.
Note: Do not immerse the heat control probe in
water or any other liquid.
Using your Frypan
1. Place on a flat, level, heat-resistant
surface.
2.Insert the control probe fully into the probe
inlet of the frypan.
3.Plug the cord into 230-240V power outlet
and turn the power on.
4. Pre heat the frypan on MED/MAX setting.
Then set the control probe dial to the
desired temperature setting. Refer to page
9 for the temperature guide.
Note:
The thermostat light on the control
probe indicates the temperature at which the
dial is set. The light will remain on until the
set temperature has been reached and then
will cycle on and off throughout the cooking.
This will ensure that the frypan maintains
the correct temperature. On the initial
heating of the frypan , it is recommended
that the temperature be allowed to cycle (the
light cycling on and off) several times. This
will help the cooking surface to adjust to a
more accurate cooking temperature.
5. After you have completed cooking, turn
the power OFF and unplug from the power
outlet.
Note:
Ensure the cord is kept well away from
the frypan when in use.
Caution:
Do not touch the frypan when in
use. Avoid touching hot surfaces. Take care
when removing food from the frypan . Do not
transport the frypan when it is hot.
Using the tilt & baste lever
The tilt & baste lever of the frypan is positioned
under the inlet where the control probe is
inserted. To tilt the frypan, push the lever
down. This allows the fat and juices to drain
from the food for crisp, low fat cooking. It also
makes it easier to baste food and serve sauces
or gravy.
