16
-4ºC
-2ºC
Factory
Setting
+2ºC
+4ºC
4. PRESS and RELEASE one of the buttons
below depending on the required
Pre-infusion setting;
Constant = PRESS the MANUAL button
Infusion = PRESS the 1 CUP button
Progressive = PRESS the 2 CUP button
When the new pre-infusion program has
been selected the espresso machine will
beep twice.
5. The espresso machine will then
automatically power on.
Espresso Thermoblock Temperature
The temperature of the thermoblock has been
calibrated to 92°C. However the coffee maker
can adjust the temperature of the espresso
thermoblock in increments of 2°C up and
down, should it be desired.
1. Ensure the espresso machine is plugged in
and switched on at the power outlet.
Note:
DO NOT press the POWER button on
the espresso machine.
2. PRESS and hold down the 1 CUP button.
3. While still holding down the 1 CUP button
briefly PRESS and RELEASE the POWER
button and then release the 1 CUP button.
To indicate you have activated the
programmability of the espresso thermoblock
temperature, a light on one of the buttons
will illuminate;
1 CUP = Factory setting
2 CUP = +2°C
CAPSULE = +4°C
MANUAL = -2°C
POWER = -4°C
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
Advanced Programming continued
Figure 1
